The task I was trying to achieve was the installation of development versions of WordPress, Drupal, MediaWiki and Moodle, all of which would require a MySQL database. Trying to load the MySQL extension should have been a simple case of uncommenting the line in the php.ini and restarting the Apache service. With Vista, this was certainly not the case.

I set up a very simple page detailing the php configuration in an index.php file:

< ?php phpinfo(); ?>

This showed me the default configuration path of my php.ini and extensions directory, amongst a whole host of other information.

In both cases the paths were incorrect. First and foremost the configuration file path stated C:\Windows when in fact I had installed it in the root (C:\PHP5). So, although I was amending the php.ini file with the correct detail, Vista was using the default values. If there is no php.ini file in Windows, then you’ll continue banging your head against a brick wall.

The problems didn’t stop there. Moving the php.ini file to the Windows directory under Vista isn’t a simple copy and paste task. You need to be administrator. But Vista’s administrator priviledges are more pseudo than actual! In order to amend and save the php.ini file in the Windows directory, you must run Notepad as administrator and save the file as such. Voila! Everything then works. The phpinfo() function returned the correct installation detail and I could continue with the job I was meant to be doing.

PS. Thanks to Rob Douglas for his help.

1. Follow my instructions on installing Apache on Windows Vista
2. And then follow my instructions on installing PHP on Windows Vista

Installing PHP with Apache on Windows Vista is a relatively simple task until you try an configure the settings in php.ini. Problems can occur and stem from the fact that when you install PHP and edit the php.ini file, you need to not only be logged in as Administrator, but run the installer and Notepad text editor as Administrator. The php.ini file also needs to be located in the Windows directory.

Below is an outline of the steps to get your PHP installation running and configured correctly.

1. Run Notepad as Administrator. Go to All Programs > Accessories Right-click “Notepad” and select “Run as Administrator”. Open the php.ini file, in my case:

   C:\PHP5\php.ini

2. Edit the php.ini file as necessary, e.g.:

   extension_dir = "C:\PHP5\ext"
   upload_max_filesize = 16M
   upload_tmp_dir = "C:\PHP5\upload"
   session.save_path = "C:\PHP5\session"

3. Enable the extensions you need by deleting the semi-colon at the beginning of the line. For example, you will commonly need the following MySQL extensions:

   extension = php_mysql.dll
   extension = php_mysqli.dll

4. Save the edited php.ini file into your Windows directory. This is very important as Vista will not read the changes but will refer to the default settings.
5. Check that the PHP directory has been added to your computers “Environment Variables”. Click Start, right-click on Computer, select Properties > Advanced > Environment Variables. Click on PATH and select Edit. If the PHP path is there, in my case “C:\PHP5\”, all is well, otherwise add the PHP path.
   • System Properties:

     

   • Environmental Variables

     

   • Edit Environmental Variable – PATH

     

6. Open your Apache configuration file (httpd.conf). Ensure the following lines are present (at the bottom of the file):

   LoadModule php5_module "C:\PHP5\php5apache2_2.dll"
   AddType application/x-httpd-php .php
   AcceptPathInfo on
   PHPIniDir "C:\Windows"

   If there are additional LoadModule lines, remove them, leaving only the one that relates to your version of Apache.

7. Find the DirectoryIndex in the Apache config and append index.php, e.g.:

   <ifmodule dir_module>
   	DirectoryIndex index.html index.php
   </ifmodule>

8. Restart the Apache service.
9. Create a index.php file in your webroot and add the following lines:

   <?php phpinfo(); ?>

10. Navigate to the file (e.g. http://localhost/index.php) and you will be presented with all the PHP and server settings. You’re now good to go.

Now it is the turn of ColdFusion 8. ColdFusion 8 as we well know is the latest and greatest incarnation of the ColdFusion platform from Adobe. It has a lot of great new features such as cfimage, cfzip, cfexchange, some contentious features such as cfthread and cfinterface, and some not-so-necessarily-cool new “Web 2.0″ features such as cffeed and cfajax. But since this article isn’t about any of these, I better stick to the topic.

Like my article on installing Apache, installing ColdFusion on Vista is again not a trivial matter and involves only what can colloquially described as a “shed load of steps”. I’m probably being a little harsh towards ColdFusion as many of the problems I encountered were more closely related to Apache than ColdFusion.

NB: This article will assume that you have pre-installed Apache (although you could use IIS if so compelled), turned off Vista’s User Account Control (UAC), disabled any firewalls you have installed and finally, but most importantly, you have downloaded ColdFusion from the Adobe website.

Let us begin.

1. Find where you downloaded your copy of the ColdFusion Installer. Right-click on the executable file and specify to “Run as Administrator”. The installer should start and you should see the screenshot below. Select “English”, or which ever your language preference is, and Click “OK”.

   

2. The ColdFusion Installation progress screen may or may not be briefly displayed.

   

3. The Introduction screen will be displayed. Click “Next”.

   

4. The License Agreement screen will then be displayed. Agree to the “I accept the terms of the License Agreement” and Click “Next”.

   

5. The Install Type screen is then displayed. You don’t need to enter a serial number unless you are installing this into a production environment. Check “Developer Edition” and Click “Next”.

   

6. The Installer Configuration screen should be displayed. Since we already have Apache 2.x installed as our web server (if you want to use IIS, you will need to skip steps 11.1 and 11.2), check “Server configuration” and Click “Next”.

   

7. The Sub-component Installation screen should be displayed. This is one of the noticeable changes from version 7 to version 8 of ColdFusion. Hovering your mouse over each sub-component will describe in more detail what each sub-component does. If you plan to integrate .NET (especially with WebServices) or carry out Flex development then make sure that the “.NET Integration Services” and “LiveCycle Data Services” items are checked. For simplicities sake, check everything and Click “Next”.

   

8. The Select Installation Directory screen should be displayed. The default directory for a Serverconfiguration will be “C:\ColdFusion8″ on a Windows machine. Click “Next” to continue.

   

9. As you have chosen to install LiveCycle Data Services, you will need to agree to a further Licence Agreement screen. Click “Next”.

   

10. The Adobe Livecycle Data Services ES Installation screen is displayed. You will need to enter a serial number into this screen for production environments. Since I am going to assume a development environment, simply click “Next”.

    

11. The Configure Web Servers / Websites screen should be displayed. This is the point where we want to connect ColdFusion with Apache. By default “Configure web server connector for ColdFusion” is checked. We need to add Apache so Click “Add”.

    

    1. The Add Web Server Configuration screen is displayed, choose Apache from the drop-down.
    2. Add the relevant Apache directory paths, e.g.:

       

       1. The Configuration Directory C:\Program Files\Apache Software Foundation\Apache2.2\conf
       2. The Server Binary Directory C:\Program Files\Apache Software Foundation\Apache2.2\bin\httpd.exe
12. The Review Configured Web Server screen is then displayed. If all the settings are correct, click “Next”.

    

13. The Choose Adobe ColdFusion 8 Administrator Location screen should be displayed. Since we are using Apache for our web server then the default Directory should be pointing to C:\Program Files\Apache Software Foundation\Apache2.2\htdocs. You can alternatively point this to C:\WebRoot or wherever you have set up your web project files. Select “Next”.

    

14. The Adminstrator Password screen is then displayed, prompting for a password. Enter one, remember it (!!) and click “Next”.

    

15. The Enable RDS & Password screen is then displayed. If you want to use this, check the box and provide an additional password. Don’t use RDS in a production environment. Click “Next”.

    

16. The Pre-Installation Summary screen is then displayed, detailing your configuration. This is your last chance to go back and make changes. If everything is OK, click “Install”.

    

17. The Installing Adobe ColdFusion 8 screen is then displayed, showing a host of marketing messages.

    

18. The Please Wait screen is displayed, and be prepared to wait!

    

19. The Installation Complete screen is finally displayed and indeed the installation is complete. Now for the configuration! Click “Done”.

    

20. Configuration and Settings Migration Wizard. Open up a browser and enter the url http://localhost/CFIDE/administrator/index.cfm to begin the ColdFusion 8 Configuration and Settings Migration Wizard. Enter your password and Click “Login”.

    

21. ColdFusion will now begin Configuring Server, which could take any number of minutes to complete.

    

22. Once the Configuration Complete is displayed, you can login to the ColdFusion Administrator and start working, or playing, with the new interface, settings and Server Monitor.

    

So, that only 22 steps! That may be the longest installation process you may go through, but the power now at your finger tips to produce hugely interactive websites is a compelling reason why to choose this version of ColdFusion, or indeed ColdFusion over other products.

Installing Apache under Windows XP was relatively trivial. This is not the case under Windows Vista. The creation of the Apache service fails, but not overtly. Furthermore, the all-important conf directory can™t be set up by the installer, probably due to user permission problems.

I finally got it working with the following procedure. I used the latest version of Apache (2.2.4) and Windows Vista Business Edition.

1. Uninstall any previous installations of Apache Web server (Start > Control Panel > Programs and Features).
   Make sure that all old Apache folders are also removed (e.g. like C:\Program Files\Apache Software Foundation\…).
2. Turn off your firewall via the Control Panel.
3. Stop User Account Control (UAC).
4. Get the most recent version of Apache from http://httpd.apache.org/ and put it on your desktop, or folder of your choosing. The file I used was called apache_2.2.4-win32-x86-no_ssl.msi, but for ease, it is a good idea to rename the install file to apache.msi.
5. Start > All Programs > Accessories Right-Click Command Prompt and choose œRun as Administrator.
6. Via the command prompt, navigate to the folder in which the apache.msi install file is located.
7. Type msiexec /i apache.msi on the command prompt.

   

8. Run through the Apache installer.

   

   

   

   

   

   

   

   

   

9. I™m running it as a development server, so I left the domain as “localhost”.
10. Choose the default server on port 80 for all users option.
11. The default installation directory is C:\Program Files\Apache Software Foundation\Apache2.2\, but again for ease, you could change the installation directory to C:\Apache.
12. Reboot your computer.
13. The little Apache feather icon won™t appear on the task bar under Vista with the present version of Apache (2.2.4). To remove the œerror box that says blank or “the operation completed successfully on startup, go to All Programs > Startup, and remove the “Monitor Apache Servers” item there.
14. Browse to http://localhost. It should say “It works!” If it doesn’t, panick, or check your httpd.conf file by going to All Programs > Apache HTTP Server 2.2.x > Configure Apache Server > Test Configuration. Follow the directions for fixing the configuration file.
15. Turn your firewall back on.
16. Turn UAC back on too, if you like to be constantly bugged by control messages!

Good luck!